Precautions for the use of CNC turning tools

Source:shengfe Date:2018-05-19 07:31

Precautions for the use of CNC turning tools
 CNC turning
Because the blade is very sharp, it can be touched by hand directly.
Please use gloves and other protective articles, especially when removed from the shell or installed on the machine tool.
 
Improper use or improper use conditions can lead to the breakage of tool breakage, resulting in the risk of bruising.
Please use safety cover, protective mirror and other protective equipment.
Please refer to the product manual and samples for use within the recommended range.
 
Due to the impact load, the excessive wear of the tool makes the cutting resistance increase sharply, causing the tool breakage and splash, and it is dangerous for the operator.
Please use safety cover, protective mirror and other protective equipment.
Please replace the worn cutting tools in time.
 
High temperature is produced when cutting tools and parts are cut. The danger of scalding is directly touching hands immediately after processing.
Please use protective gloves, such as protective gloves.
 
High temperature chip spatter and excessive chip discharge will cause danger of scalding.
Please use safety cover, protective mirror and other protective equipment.
When removing chips, the machine tools should be shut down, and protective gloves should be worn, and tools such as pliers or clamps should be used.
 
The spark generated during cutting or the heat generated by breakage may ignite chip and cause fire.
Flammable explosives should be far away from the cutting area.
Fire protection measures should be adopted when using non water soluble cutting fluid.
 
When rotating at high speed, such as machine tool clamps and other poor balance performance, vibration and flutter will be generated, resulting in broken tools and dangerous situations.
Please use safety cover, protective mirror and other protective equipment.
It is necessary to test the machine and confirm that there is no abnormal sound such as vibration or chatter.